Press to select operation mode, Press to start the operation, Press to select airflow volume – Panasonic CSXC181KP User Manual
Page 11: Press to select room temperature, Press ([^ continuously, Press, Fan - air circulation operation, Automatic airflow volume, Range of louver adjustment
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1
MODE
Press to select operation mode.
■ The display changes in the order
AUTO -> COOL -► DRY FAN
each time the button is pressed.
2
OFF/ON ®
Press to start the operation.
■ Operation indication lamp (RED) will light up.
■ Press once more, to stop the operation.
3
FAN SPEED
Press to select airflow volume.
■ The display changes in the order.
® @ ® ® ®
AUTO FAN
^
Automatic
Low
Medium
® ®
III
High
TEMP.
Press to select room temperature.
■ Cooling, Soft Dry, Air Circulation - Select temperature as desired.
(16“C~30°C)
■ Automatic.
2°C lower than
standard
standard
H
2“C higher than
standard
5
SWING
MANUAL
_
w m f i L ..
I
Press ([^ continuously.
■ The vertical airflow direction louver will move up and down. Release the
button when the louver is at the desired position.
_
SWING
Press ■
■ The vertical airflow direction louver will swing up and down automatically.
ilANUAL
To stop the automatic airflow direction operation, press button.
FAN - Air Circulation Operation.
■
When the room temperature reaches the setting
temperature, operation commences at Low air
flow volume. It stops when the room temperature
drops to 2X below the setting temperature (It is
useful when using a heater).
Automatic Airflow Volume.
■
The speed of the indoor fan is adjusted automati
cally according to the operation. The indoor fan
stops occasionally during cooling operation.
Range of louver adjustment.
10 ◄