Follow steps 1-5, To pause play, Skipforwafd/ backward (ekfp function) – Panasonic SL-SX340 User Manual
Page 3: Backward (search function), Resume function notes, For your reference, I/pfri” indication, Removing discs, Auto-off function, Note on cd-r and cd-rw
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Sequential Play
[Basic Play
Follow steps 1-5.
In step 2: Connect the stereo earphones and wired remote control {SL-SX390) to the headphone jack (Qj.
(Plug in firmly.)
In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when
pressed while the level is displayed, if any other display is shown, it changes to show the current level. (The
volume returns to 10 when you disconnect the power source.)
•Play stops automatically when all the tracks have been played.
• If the unit has been connected to the car audio system, set this unit’s volume to 10, then adjust the volume level on
the system.
Operation
------- ------ —
r.
----------7—
To pause play
■ ■
——
Skipforwafd/
backward
(ekfp function)
backward
(search function)
, 1
Button
Press during play.
Press again to restart play.
Press during play.
Resume function
Play starts from the beginning of
the current track the next time you
press [^/11] (main unit) or [H/^]
(remote control, SL-SX390 only).
Total number of tracks
Press during stop mode
No indicator is shown.
Press during play.
(Press [!◄◄ ] twice to skip to the
beginning of the previous tracks.)
Backward
Forward
Press and hold during play.
• During program play (page 4), these buttons are
used to skip forward or backward through the
programmed sequence of tracks.
•You cannot skip to tracks that have been played
in random or random repeat play (page 4).
• During program play, 1-track repeat play, random
play and random repeat play (page 4), search op
eration is limited to the current track only.
Resume function notes
•Opening the lid while in the stop mode or replacing the disc while in the off mode cancels the function. (It may re
main active if you replace a disc in the off mode.)
• Play may resume from the beginning of the next track if you stopped play near the end of a track.
•The resume function works automatically and cannot be turned off.
For your reference:
“ло
d /S
l
” indication
This indication appears for about 30 seconds if [►/II]
is pressed when no disc is loaded in the unit or if the
disc is not properly secured.
“i/Pfri” indication
This indication appears for about 10 minutes when the
cover is opened. (However, the indication does not ap
pear when the unit is turned off.)
Removing discs
1
Press [■] to stop play and disc rotation.
2
Slide [OPEN ►] to open the lid.
3
Press [PUSH] to release the disc.
Do not stop the disc by hand or try to remove it before
it stops rotating. This can damage CDs.
Never insert foreign objects into the unit.
Auto-off function
if you leave the unit in stop mode for about 10 minutes
(30 seconds if disc is not loaded), it turns off to save
the batteries.
Note on CD-R and CD-RW
This unit can play CD-DA format audio CD-R and
CD-RW that have been finalized* upon completion
of recording. It may not be able to play some CD-R
or CD-RW due to the condition of the recording,
^Finalizing is a process that enables CD-R/CD-RW
players to play audio CD-R and CD-RW,