Touch pad, Display, Read me first – Panasonic TOUGHBOOK CF-28 User Manual
Page 8: Usage environment, Handling, Maintenance, A characteristic of transflective display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Read Me First
Usage Environment
Place the computer on a flat stable surface.
In use:
Temperature: 5 °C to 35 °C {41 °F to 95
Humidity; 30% to 80% RH (No condensation)
Not in use: Temperature: -20
°C
to 60 °C (-4
°F
to 140 °F}
Humidity: 30% to 90% RH (No condensation)
Handling
This computer has been designed so as to minimize shock to the LCD and hard disk drive, the
leakage of liquid (e.g., water) on to the keyboard, etc., but no warranty is provided against
such trouble. Therefore, as a precision instrument, be extremely careful in the handling.
Do not drop or hit your computer against solid objects.
Do not carry your computer when it is on.
Remove all cables before transporting your computer.
We recommend preparing a fully charged battery (and optional charger, if possible).
When transporting spare batteries inside a package, briefcase, etc., it is recommended that
the batteries be stored in a plastic bag.
Do not place the computer upright or allow' it to tip over. When the computer receives
extremely strong shock after falling, the hard disk or floppy disk drive, etc., may become
inoperable.
Do not carry the computer while the display is open, or carry it by gripping the display.
Do not put anything (e.g., a piece of paper) between the display and keyboard.
Always carry your computer with you w'hen traveling. Never check it in with luggage. For
use of the computer inside an aircraft, we recommend asking the airlines regarding their
policy on this issue.
It is a good idea to make backup copies on disks and carry them with you.
Do not leave a disk in the drive while transporting your computer.
Maintenance
Touch Pad
page
Display
Dse the soft cloth included with the
computer. (For more information,
refer to “Suggestions About Clean
ing the LCD Surface” that comes
with the soft cloth.)
Areas excluding the display
Wipe these areas with a soft cloth,
after applying water or detergent di
luted w'ith water to the soft cloth and
firmly wringing out excess water.
r
Do not use benzene, thinner, or rubbing alco
hol. Doing so may adversely affect the surface,
e.g., discoloration. In addition, do not use com-
mercially-available household cleaners and cos
metics, as they may contain components harm
ful to the surface.
Do not directly add or spray water or detergent.
If liquid enters the inside of the computer, it may
cause it to work improperly or be damaged.
A Characteristic of Transflective Display
(Only for models with 12.1 type LCD)
Immediately after the computer is turned off or enters the standby mode, you may notice a
black pattern appearing temporarily at the edges of the display. This is a characteristic of the
transflective display and is not a malfunction.
8