Panasonic NV-D48 Series - Manual (Page 10)

SETTING THE TUNER IN THE VTR
The tuner in the VTR makes it possible to receive TV
broadcasts and to record these programmes without having
to turn on the TV set.
Preparation
•Turn the TV set on and select the programme position
(channel) which you have tuned to the video playback
channel.
•Press the VTR On/Off Switch to turn the VTR on.
•Press the VTR/TV Selector to “VTR” position.
o
0
Press the Preset/Fine/Normal Button.
The indication on the Multi-Function Display changes
from the clock indication to the position indication.
Press the Channel Up or Down Button to select a
programme position (channel) which you want to tune
to a TV station.
^ Press the Band/AFC Button to select the “I”, “111’ or
“U” position.
Display of the programme positions 1-32
\ .
I O _ • I
I I u ■ I
Indication of the
selected TV band Selection of the
programme position
illfitilllll •UHF
if|i, ii m iffSl
llllilipflifi 0-5 5 A-11 21-69
1-3 4-11 21-69
O Press the “-I-” or Button until the picture of the
desired station on your TV is satisfactory.
•If the “-I-” or Button is pressed while pressing the
Next Button, the stations will change quickly.
During the station search
(The position indication
flashes on and off.)
Tuned condition
"VrnjTiTiTrnTTx
20 _ ■ /a
' J o • • r
0 _
1 u
•The tuned station is automatically memorized.
Repeal steps 0-0 ^or each channel you want to tune to a
station.
@ Press the Preset/Fine/Normal Button twice.
The indication on the Multi-Function Display changes
to the clock indication.
The tuner in the VTR can be preset with up to 32 stations.
10