Setting the max volume, Protect: on, Protect: off – Yamaha YSP-1100 User Manual
Page 81: Mrn uolune set
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING SYSTEM PARAMETERS
4
Press
<1
/
1>
to switch between PROTECT: ON
3
Press ^ ^ on the remote control so that
and PROTECT: OFF,
MAX VOLUME SET is shown in the front
panel display.
PROTECT: ON
♦
PROTECT: OFF
• Select PROTECT: ON to activate the protection
feature.
• Select PROTECT: OFF to deactivate the protection
feature.
5
Press STANDBY/ON on the front panel to set
this unit to the standby mode.
The new setting will be activated when you turn on
the power of this unit next time.
Setting the MAX VOLUME
You can set the maximum volume level so that this unit
will not output sound beyond the limited volume level.
1
Repeat steps 1 to 3 in “Using the system
parameters” on page 76.
2
Set the operation mode selector to YSP to
switch to the operation mode of this unit.
W/AV
iilii
MRN UOLUNE SET
4
Press ENTER.
5
Press <| /1> to adjust the maximum volume
level.
Control range: MAX, 99 to 01, MIN
Control step: 1
6
Press STANDBY/ON on the front panel to set
this unit to the standby mode.
The new setting for the maximum volume level will
be activated when you turn on the power of this unit
next time.
77
En