Image location (image location), Left (left), Tone control (tone control) – Yamaha YSP-1100 User Manual

Page 70: Treble (treble), Bass (bass), Right (right), Dsol) пену, Oihflse locfliloh, Sound menu, Iohieol

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MANUAL SETUP

■ IMAGE LOCATION (Image location)

Use to adjust the direction from which the front left and
right channel sound is heard so that the each sound can be
heard closer to the center channel.
Use this feature to redirect audio signals if the sound
coming from the front left and right seems unnatural, such
as when your listening position is not the center of your
listening room.
You can only adjust this parameter when 3 beam or 5
beam is selected as the beam mode (see page 42).

Choices: ON, OFF
Setting range:

to 95%

Initial setting: 0%

SOUND MENU

Use to manually adjust various parameters related to the

sound output.
SET MENU ^ MANUAL SETUP SOUND MENU

DSOl) ПЕНУ

► РОТОНЕ CONTROL

E)SUBWOOFER SET

OnUTE LEUEL
D) AUDIO DELAV

E) R00M EQ

F>DD/DTS Dynamic Range

[

]/C

3 : IJp-^Down

CENTER]:Enter

OIHflSE LOCflIlOH

OFF

L C

I----

► ON

-4

[л.]/[т] :IJp/Down [-^]/[Ц :Sel

CENTER]:Return

LEFT (Left)

Adjusts audio signals towards the left.
The higher the percentage, the louder the output from the
center.

Without adjustment

With the front left
channel adjusted

■ TONE CONTROL (Tone control)

You can adjust the tonal quality of the sound beams.

ШШ.

iOHIEOL_

TREBLE...... 0dB ■

BASS........ 0dB ■

TREBLE (Treble)

Use to adjust the high frequency response.
Choices: -12 dB to +12 dB
Initial setting: 0 dB

BASS (Bass)

Use to adjust the low frequency response.
Choices: -12 dB to +12 dB
Initial setting: 0 dB

RIGHT (Right)

Adjusts audio signals towards the right.
The higher the percentage, the louder the output from the
center.

Without adjustment

With the front right
channel adjusted