Battery removal, Battery life, Notes – Panasonic RQV162 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

POWER SOURCE {^[

RADIO

•Battery removal
Press battery “2" toward the © battery terminal and
remove it.

•Battery life

When the batteries are weak, the tape speed wilt slow
down, the sound will become distorted, and the volume
will decrease. Replace them with new ones as soon as
possible.

To Prevent Possible Damage to this Unit

•Load new battery with their polarities (© and 0)

aligned correctly.

•Do not apply heal to batteries, or internal shortcir-

cuit may occur.

•If this unit is not to be used for a long period of time,

or used on AC power source, remove the batteries
and store them in a cool and dry place.

•Remove spent batteries immediately.
•Do not use old and new batteries together. Also

never use an alkaline battery with a manganese
battery.

1. Connect the included stereo earphones to the Head

phones Jack.

2. Set the Function Selector to "FM" or “AM”.
3. Tune in your favorite station using the Tuning Control.

•When you listen to a FM broadcast, set the FM

Mode Selector to the proper position (Refer below).

4. Adjust the Volume Control, Graphic Equalizer Con

trols and XBS Level Control to the desired setting.

•To turn off the radio, set the Function Selector to

“TAPE

Notes:

•To receive FM stereo broadcasts, set the FM/Mode

Selector to “STEREO".

•If FM stereo reception is poor (excessive noise), set

the FM Mode Selector to "MONO”. This will reduce
the noise and provide more clear reception; howev

er, the broadcast will not be heard in stereo.

- 8 -