Panasonic RQV162 - Manual (Page 11)

n Dolby Noise Reduction
This unit includes Dolby Noise Reduction which reduces
tape noise to a remarkable degree.
•Set the Dolby Noise Reduction Switch to "ON" to
playback a tape recorded with Dolby Noise Reduction.
For other tapes, set the switch to "OFF".
■ Tape Selector
Set the Selector to the appropriate position according to
the type of tape being used.
Cr02 |MTLl:Metal tape/High bias chromium tape or
equivalent
NOR: Low bias ferric oxide tape
■ Auto Reverse (Continuous Playback)
When the tape comes to the end of its travel, the auto
reverse system functions, and the tape direction
changes automatically to start playing the opposite side
of the tape.
•The cassette tape will run continuously, changing from
fonward to reverse, then back again, etc,, until the Stop
Button is pressed.
■ Manual Reverse
Select the playback side, Forward or Reverse, by setting
the Direction Selector to "FWD” or “REV".
11-