Basic-qperation, Function, Tapping/ciicking – Panasonic TOUGHBOOK CF-48 User Manual

Page 17: Double-tapping, Dragging, Touch pad operation, Phandling-thetouch-pad-j, Touch pad, Basic operation)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Touch Pad

(Basic Operation)

Work Surface

Use the touch pad to move the cursor on the display and perform normal computer operations.

For instructions on how to operate, refer to

“Touch Pad (Advanced)”.

^NOTE>

The touch pad has been designed to work only when a finger is used. Therefore, do not use

any implement on the touch pad.

■Basic-Qperation-|

Function

Moving the Cursor

Tapping/Ciicking

Double-Tapping/
Double-Clicking

Dragging

Touch Pad Operation

Move the tip of your finger

lightly over the surface.

Two quick taps, but on the sec- While holding down the but-

ond tap leaving your finger ton, moving your finger on
down (applying pressure) and the work surface,
moving it on the work surface.

pHandling-theTouch-Pad-j

• Do not place any object on the work surface or press down forcefully with sharp-pointed

objects (e.g., nails), hard objects that can leave marks (e.g., pencils and ball point pens).

• Do not allow things that could dirty the touch pad, such as oil. The cursor may not work

properly in such cases.

• When the touch pad becomes dirty:

Wipe to remove dirty áreas by using a dry soft cloth such as gauze or a soft cloth first
applied with detergent diluted with water and then thoroughly wrung.

Do not use benzene, thinner, or disinfectant-type alcohol.