Panasonic WV-CB700A - Manual (Page 7)

Turn the controls clockwise to increase the red
and blue signal levels, and counterclockwise to
decrease these levels.
Note:
As these controls employ Digital Processing,
the Red and Blue signal levels will be changed
in discrete steps.
124. Red and Blue Pedestal Level Controls
(PED, R/B)
The black balance can be set manually by these
controls when the White/Black Balance Selection
Switch (126) is set to the MANU position. Turn these
controls clockwise to increase the red and blue
pedestal levels, and counterclockwise to decrease
the levels.
Note:
As these controls employ the Digital
Processing, these levels will be changed in the
steps.
125. Total Pedestal Level Control
(TOTAL PEDESTAL)
This control can adjust the pedestal level of the
video signal (luminance) for matching the black level
between two or more cameras in a system. Turn this
control clockwise to increase the pedestal level,
and counterclockwise to decrease the level.
Note:
As this control employs the Digital Processing,
this level may be changed in the step.
126. White/Black Balance Selection Switch
(AUTO/MANU,MAN/A/B)
This switch is used to select the white balance and
black balance modes as follows:
MAN:
The white balance and black balance can be
adjusted by the Red and Blue Gain Controls
(123) and the Red and Blue Pedestal Level
Controls (124).
A: The White Balance can be set automatically by
pressing the Auto White/Auto Black Set Switch
(127) upwards, The setting is stored in memory
A.
B: Similar to A, but the setting is stored in memory
B.
Note:
Two white balance setting, one each for
different lighting conditions such as indoor and
outdoor, may be stored in the two memories, A
and B.
- 5 -