Connection with the camera, Operating procedure – Panasonic WV-CB700A User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
Connection with the Camera
Connect the Remote Control Box Connector on the
Camera Head to the Remote Control Unit Extension
Connector (156) on the Remote Control Box by
using the optional RGB Cable WV-CA10B25 or
WV-CA10B50.
Note;
In the following system connection, the video
signal from the Monitor Output Connector on
the Camera Head has priority of the video
signal over the Monitor Output Connector (154)
on the Remote Control Box, so the picture is
not displayed on the monitor connected to the
Remote Control Box.
The decrement of the video signal for the cable
length is shown in the following.
The cable length
2 m:
25 m:
50 m:
100 m:
Decrement
Approx. \0%
Approx, 15*/.
Approx. 20*/.
Approx. 30'/
OPERATING PROCEDURE
Refer to the Operating Instructions of the Color Camera WV-F700 or WV-F500 Series for details.
-
1 1
-