Panasonic KX-TC18000B - Manual (Page 6)

6| Things You Should Know
6-A Battery 6-B Battery Replacement
Recharge
When the RECHARGE indicator flashes or
the unit beeps intermittently, place the
handset on the base unit to recharge the
battery for 4 hours.
RECHARGE
• If you DO NOT recharge the handset Indicator---------
battery for more than 15 minutes, the
RECHARGE indicator will continue to flash.
Battery information
After your Panasonic battery is fully charged:
Operation Approx, battery life
While in use
(TALK)
near the
base unit'
Up to about 6 hours
away from
the base unit
■ Up to about 4 hours
While not in use (Stand-by) Up to about 7 days
‘Within about 10 feet (3 m)
• Battery life may vary depending on usage conditions and ambient
temperature. .
•Clean the handset and the base unit charge contacts with a
soft, dry cloth once a month. Clean more often if the unit is
subject to grease, dust or high humidity. Otherwise the battery
may not charge properly.
• If the battery is fully charged, you do not have to place the
handset on the base unit until the RECHARGE indicator flashes.
This will maximize the battery life.
•The battery cannot be overcharged.
If the RECHARGE indicator flashes after being fully charged,
replace the battery with a new Panasonic P-P501 (KX-A36) battery.
To order, call the accessories telephone number in section 1-A.
1
2
3
Remove the cover
by sliding while
pressing the arrow.
Replace the battery,
and close the cover.
Be sure to charge
the new battery for
4 hours.
Attention:
The product you have purchased is powered by a nickel
cadmium battery which is recyclable. At the end of its
useful life, under various state and local laws, it is illegal to
dispose of this battery into your municipal waste stream.
Please call 1-800-8-BATTERY for information on how to
recycle this battery.
6-C Base Unit Location/Noise 6-D Wall Mounting
Calls are transmitted between the base unit and the handset using
wireless radio waves. For maximum distance and noise-free
operation, the recommended base unit location is:
Away from electrical appliances .
such as a TV, personal computer
or another cordless phone. In,a HIGH and CENTRAL
location with no obstructions
such as walls.
Hf more than one cordless phone is being used and your handset
is near another cordless phone’s base unit, noise may be heard.
Move away from the other cordless phone’s base unit and closer
to your base unit.
The unit can be mounted on a wall phone plate.
t
Pull down the
handset hook until it
locks, so the tab
holds the handset.
Connect the AC
adaptor and
telephone line cord.
Mount the unit, then
slide down.
• Raise the antenna.