Panasonic KX-TC18000B - Manual (Page 2)

Getting Started
1-A Accessories 1-B Location of Controls
□ AC Adaptor...................... one
Order No. KX-TCA1-G
Handset
□ Telephone Line Cord .. . one
RECHARGE
Indicator (6-A)
□ Battery..............................one
Order No. P-P501 (KX-A36)
□ Battery Cover................... one
Order No. PQKK10089Z1
[TALK] Button and
Indicator (2-A)
[TONE] Button
(5-D)
(RINGER) Button
(2-B)
Antenna
□ Belt Clip............................one
Order No. PQKE10079Z1
S®®
f® ® ®
S’®
•For extra orders, call
1-800-332-5368.
Button (5-A, 5-B)
[PROGRAM]
Button {1-C,
3-A, 4-A, 5-A)
AUTO] Button
(1-C, 3-A, 5-A)
[DIRECT) Button
(4-A)
Headset Jack (1-E)
[LOUD] Button
(2-A)
[REDIAL] Button
(2-A)
[PAUSE] Button
(5-E)
[^ (Channel)
Button (2-A)
---- Charge Contacts (6-A)
1-C Settings
Install the battery in the handset,
and close the battery cover,
locking it into place.
Charge the battery for 4 hours
•See section 6-A tor more details.
•The IN USE/CHARGE indicator lights.
IN USE/CHARGE Indicator
•USE ONLY WITH Panasonic AC ADAPTOR KX-TCA1
(Order No. KX-TCA1-G).
•The AC adaptor must remain connected at all times.
(It is normal for the adaptor to feel warm during use.)
•To connect a standard telephone on the same line,
see section 6-F,
To select the dialing mode TONE (preset) or PULSE
You can program the dialing mode using the handset near the base
unit. The TALK indicator light must be off before programming.
® twice (PULSE)
Press [ PROGRAM 1»[ AUTO 1 ■» OR »[PROGRAM].
® twice (TONE)
•To cancel during programming, press [PROGRAM]. Start again
from the beginning.
• If 3 beeps sound during programming, a wrong key was pressed.
Start again from the beginning.