Panasonic CT-13R23 - Manual (Page 18)

Set-Up Features
Sel Time
Ant (Antenna)
Auto Pmg (Program)
Manual Prog (Program)
CC (Closed Caption) on Mute
CC (Closed Caption) Mode
English, Español (Spanish) or Français (French)
Located On Remote Control
Ant (Antenna) — The proper Input mode must be
selected for the type of signal at the antenna input
■ TV mode IS used when the Receiver is not connected
to a cable TV system, Гог example when using a
VHF/UHF antenna (channels 02 - 6Э)
■ Cable mode is used when the Receiver is connected
to a Cable TV system and you are not using a cable
company converter box (channels 01 - 125)
1 Press the ACTION button to display the Mam Menu
2 Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon
3 Press the ACTION button to display the Set-Up
Menu
Set Time — Clock (when set) will display on screen
at initial “Turn On", after a channel change and when
pressing the RECALL button The time must be set first
in order to operate the Program ON/OFF Timer
1 Press the ACTION button to display the Mam Menu
2 Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon
3 Press the ACTION button to display the Set-Up
Menu, "SET TIME" will be highlighted
Press the VOL LEFT or RIGHT button to set hours
(set AM/PM accordingly)
Press the CH DOWN button to select minutes
position
Press the VOL LEFT or RIGHT button repeatedly to
set minutes
Press the ACTION button twice to exit the Set-Up
Menu
4 Press the CH DOWN button to highlight “ANT’
5 Press the VOL LEFT or RIGHT button to select TV
or CABLE
B Press the ACTION button twice to exit the Set-Up
Menu
- I B -