Panasonic CT-32G32U - Manual (Page 24)

Auto Prog
This feature allows you to place all channels with a video
signal into Channel Scan Memory.
NOTE: This feature is disabled when Game Guard
Lock is activated.
Set-Up Features
(cont.)
1. Press
2. Press ^or^ and or ^ to highlight the Set-Up
Icon.
3. Press (^3 to display the Set-Up Menu.
SET-UP
4.
5.
Press W to highlight AUTO PROG.
Press *^or^ to start Auto Programming. Channels
will automatically advance until all channels have
been scanned.
6. Press twice after completion of Auto
Programming to exit menus.
NOTE: Channel numbers with signal present will turn blue
which indicates stored in Channel Scan Memory.
Manual Prog
This feature allows you to select which channels are
placed into Channel Scan Memory.
1. Press
2. Press ^or^ and or ^ to highlight the Set-Up
Icon.
3. Press @ to display the Set-Up Menu.
SET-UP
4. Press W to highlight MANUAL PROG.
5. Press ^or^ todisplay the Manual Programming
Menu.
NOTE: This feature is disabled when Game Guard
Lock is activated.
AT TO ENTER CHANNEL NUMBER
TO ADD CHANNEL........
4 TO DELETE CHANNEL
6. Use the Aor^ or the Remote Keypad "0 through
9" buttons to select channels.
7. Press ^ to add channel(s) to memory (Blue). Press
to delete channels from memory (Yellow).
8. Repeat steps 6 and 7 to continue adding or deleting
channels.
9. Press twice to exit menus.
-
24
-