Power and sound controls, Power, Volume – Panasonic CQRX65EU User Manual

Page 4: Tone enhancement, Attenuator

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Power and Sound Controls

Power

If the car is not already running, turn the key in the ignition until the ac

cessory indicator lights.

Press PWR to switch on the power.

Volume

• Press “yV or to increase or decrease volume.

MH (

UUL

-Volume Level

Oto 40

• Press or for more than a half second to change numeric

levels on the display rapidly.

Tone Enhancement

• Press

(LOUD) to enhance bass and treble tones when listening at

low or medium volume.

• Press (LOUD) again to deactivate.

Attenuator

• Press ATT. Volume will decrease to about 1/10 of its previous level.
• Press ATT again to deactivate when listening at normal volume.

Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume level
adjuster so that you will not be deafened with sudden loud volume.

This system operates as follows. When PWR is switched on, the volume level is low. After that, the vol

ume level gradually returns to its previous level prior to switching off the unit.

CQ-RX65EU