Panasonic CQRX65EU - Manual (Page 11)

or
TPS Operation (Tape Program
Search)
® Press 3(TPS) to activate the tape program search mode.
CD
From the current selection, decide which program you want to select.
Now, press several times forward (up to 9 programs) or press
several times backward {up to 8 ) to select the corresponding
program number.
(Fast forward:)
1................^9
t______*
(Rewind:)
0.......... -—►8
t______*
EXI.To select the current program again
press 3 (TPS), and press once.
EX2. To select the 1st program backward
of the current selection, press 3{TPS)
once, and press
two times.
EX3. To select the next program, press 3
(TPS) and press once.
EX4. To select the 3rd program forward of
the current selection, press 3 (TPS)
once, and press
three times.
• To turn it off, press 3 (TPS) again.
O ’O Of
^ TPS 0 0 I
t
0-0
0-0
Note:
The TPS mode may not work correctly in the following cases. This, however, does not mean that the unit is
defective.
• There is an interval less than 4 seconds or having a high level of noise or hum between programs.
• There is particularly low-level passage during the program.
CQ-RX65EU
11