Leica Geosystems Leica GeoAce - Manual (Page 65)

GeoAce, Leica GeoAce RTK Base Station User Interface 65

A message will show if the entered code was valid or invalid.
How to add Extended Features via Virtual Wrench:
•
The instrument will automatically load unlock codes when it is connected to
Virtual Wrench.
How to add Extended Features via USB flash drive:
•
Store the unlock code in a plain text file on a USB flash drive (e.g. using a simple
text editor such as Notepad).

The text file containing the code must end with .auth to be recognised by
the instrument.
• Turn off the instrument and insert the USB flash drive.
• Turn on the instrument.
• The unlock code will be automatically loaded from the USB flash drive on start up.