Leica Geosystems Leica GeoAce - Manual (Page 29)

GeoAce, Leica GeoAce RTK Base Station User Interface 29
Fixed Position Manually set the instrument to report a fixed position or automatically take over posi-
tion data from other operating modes (e.g. Snap Previous and Averaged). This
position will be used unless the position mode or the Fixed Position is changed.

When position data are available simply switch to Fixed Position mode. The
position values will be taken over. No further set up is required.

At an unknown position the long time Averaged (e.g. 12 or 24h) function-
ality can be used to acquire accurate position data. When the averaging is
done and position data are available, simply switch to Fixed Position mode.
Input formats:
• Latitude and longitude - in degrees / minutes / seconds or decimal degrees
• Height - in meters or feet
How to set position values manually:
1) To enter a fixed position select Latitude, Longitude or Height and press
. Use the navigation keys to move the cursor and to change the
settings to the required value.