Leica Geosystems Leica GeoAce - Manual (Page 48)

48 GeoAce, Leica GeoAce RTK Base Station User Interface
How to load a config file into the instrument:
1) Insert a USB flash drive into the instrument.
2) Select Load config from USB and press to enter the Load config? menu.
3) In the Load config? menu select Yes. Then select the file to be loaded into the
instrument.
4) The Main Status screen is displayed after the configuration file has been
successfully loaded.

Possible error messages are No config loaded or No valid file. Make sure
the USB flash drive is installed correctly and the configuration file does not
contain invalid characters or is corrupted.

To select any of these options, use the up/down keys to scroll to the
required menu option and press the key to select it. If more than one file
is available, use the up/down keys to select the configuration file that
should be loaded into the instrument.