Leica Geosystems Leica GeoAce - Manual (Page 55)

GeoAce, Leica GeoAce RTK Base Station User Interface 55

Make sure the internal battery has been fully charged before perfoming a
Software Update!

Do not interrupt the Software Update procedure.
Update via USB flash drive:
1) Insert a USB flash drive.
2) Select Update via USB and press the key. Select the required software
version if more than one is available.
3) Press the key to compare the current version with the version to be installed.
Both version numbers will be displayed.
4) Select No to cancel the operation or Yes. Press the key to start the update
process.

The instrument will automatically reboot after the installation is complete.
Update via Virtual Wrench:
1) The instrument must have cell data service available (e.g. SIM card installed and
cell network accessible).
2) Select Update via VW and press the key to start the update process.