Leica Geosystems Leica DISTO Classic5 - Manual (Page 10)

10 Functions DISTO classic 5 1.2.0 en
de
en
fr
it
es
pt
nl
da
sv
no
fi
jp
zh
ko
pl
hr
hu
ru
cz
el
Determination with two points
For estimating the height/
width of buildings. Very
useful for making measure-
ments from standing position
(no bending) if the height is
determined with two or three
distances.
Press until
appears on the display; laser is activated and "1
---" starts blinking.
Aim at the upper point (1).
Trigger measurement; do not move the
instrument!
Value is accepted.
appears on the display and "2 ---" starts blinking.
Point the DISTO approximately horizontal (2).
Press, a continuous measurement is triggered.
Move the DISTO a large amount around the ideal
measurement point.
Stop of continuous measurement. The height
and width are displayed from measurements
(Pythagoras).
Detemination with 3 points
Press until
appears on the display; laser is activated and "1
---" starts blinking.
Aim at the upper point (1).
Trigger measurement; do not move the
instrument!
Value is accepted.
appears on the display and "2 ---" starts blinking.
Point the DISTO approximately horizontal (2).
Press, a continuous measurement is triggered.
Move the DISTO a large amount around the ideal
measurement point.
Stop of continuous measurement.
Value is accepted and and on the display "3 ---" starts
blinking.
Aim at the lower point (3).
Trigger measurement; do not move the
instrument!
The height and width are displayed from three
measurements (Pythagoras).