CANOGA PERKINS 2370 High-Speed Universal Fiber Optic Modem - Manual (Page 13)

EdgeAccess® Universal Chassis System
1.2 Fiber Optic Options
The 2370 includes one fiber-optic transmitter and receiver. Use the 2370 with multimode or single
mode fiber optic cable and SC or ST connectors, depending on the transmitter option.
The transmitter options include:
 Single Mode, at 1310 nm and 1550 nm
 Multimode, at 1310 nm
 CWDM
 BIDI
For descriptions of the options by model number, see Chapter 6.
1.3 Features
The 2370 supports these features:
 Status LEDs
 Console port for accessing management functions through SLIP, PPP, SNMP
 Redundancy: Two modems at each end of the link provide full redundancy in these modes of
operation:
 Auto Switchover Monitors the link; if the active modem fails, switches automatically to the
inactive modem
 Manual Primary Makes the primary modem active
 Manual Secondary Makes the secondary modem active
 Off Disables redundancy
 ELIM connector adapters for P53
 Local and Remote loopback for test
 TRM/MDM and Reset switches
Model 2370 User Manual 1-5