beautypg.com

3link loss forwarding - extension to user, Link loss forwarding - extension to user -4, 3 link loss forwarding - extension to user – CANOGA PERKINS 9120 Gigabit Ethernet Media Converter User Manual

Page 18

background image

Canoga Perkins

9120 Gigabit Ethernet Media Converter

3-4

3.2.3 Link Loss Forwarding - Extension to User

When a loss of signal is detected on the Extension Port Rx, the fault is propagated to the User Port.
The User Port Tx LED will display red, indicating the propagation of the fault to the User Port. The
fault is then propagated to the remote link.

Note: The DIP switch Link Loss Forwarding feature must be enabled (up) and the Direction switch
set to "Extension to User (up)."

Figure 14. Link Loss Forwarding - Extension to User.

Extension

Port

See also other documents in the category CANOGA PERKINS Computer hardware: