C.R.Plastic Products T35 - Manual (Page 3)

Step 1: Attach Leg (B) to Table Top (A) with 6 - 1 ½
” screws.
Step 2: Repeat for remaining three legs.
Figure 1
Step 3: Attach the Leg Support (C) to table legs with 4- 2
½
” screws using peck holes
for alignment. Do not tighten.
Step 4: Install 4- 1
½
” screws as shown and then tighten previously installed
2 ½
”screws
Step 5: Flip table over and insert Leg Support Fill Panel (D)
Figure 2
Required Qty
Table Top (A) 1
Leg (B) 4
1 ½
” Screws
24
Required Qty
Leg Support (C) 1
Leg Support Fill
Panel (D)
1
1½” Screws 4
2½” Screws 4
Step 1
Use 1
½
” Screws
Step 3
Use 2
½
” Screws
Step 4
Use 2
½
” Screws
Screw
Leg (C)
Step 5