C.R.Plastic Products T33 - Manual (Page 2)

A. Table Top Qty: 1
B. Leg Qty: 2
PARTS LIST:
A - Table Top
B - Leg
HARDWARE LIST:
8 – 1½” Screws
Note:

Read these instructions carefully before assembling.

Tools required: # 2 Phillips or #2 Robertson bit and power drill.

Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces.

Caution!! Do not over tighten screws.
Step 1: Attach Leg (B) keeping it centered as shown using 4 - 1 ½
” screws.
Step 2: Repeat for second leg (B).
Figure 1
Required Qty
Table Top (A) 1
Leg (B) 2
1 ½
” Screws
8
Use 4 - 1 ½
” Screws