C.R.Plastic Products T30 - Manual (Page 3)

Step 1: Attach Medium Leg (C) to Large Leg (B) with 4 - 1 ½
” screws using peck
holes for alignment.
Step 2: Attach Small Leg (D) to Medium Leg (C) with 4 - 1
½
” screws using peck
holes for alignment.
Figure 1
Step 3: Attach the leg assembly to Table Top (A) using 16- 1
½
” screws.
Figure 2
Required Qty
Large Leg (B) 1
Medium Leg (C) 1
Small Leg (D) 1
1 ½
” Screws
8
Required Qty
Table Top (A) 1
1½” Screws 16
Step 1
Use 1 ½
” Screws
Caution: Make sure all the screw holes line up
with the table top boards; not between them
before you install any screws.
Step 2
Use 1 ½
” Screws
Large Leg (B)
Medium Leg (C)
Small Leg (D)
Medium Leg (C)