C.R.Plastic Products C36 - Manual (Page 2)

A. Seat Qty: 1 B. Back Qty: 1
E. Short Stringer Qty: 1
F. Long Stringer Qty: 1
G. Foot Rest Qty: 1
PARTS LIST:
A - Seat
B - Back
C - Left Leg
D - Right Leg
E - Short Stringer
F - Long Stringer
G - Foot Rest
HARDWARE LIST:
9 – 1½” Screws
14 – 2½” Screws
Note:

Read these instructions carefully before assembling.

Tools required: # 2 Phillips or #2 Robertson bit and power drill.

Find a clean, smooth area on which to work, such as a carpet, in order to avoid scratching the plastic surfaces.

Two people might be required for assembly.

Caution!! Do not over tighten screws.
C. Right Leg Qty: 1 D. Left Leg Qty: 1