BendixKing KLX 135 - Quick Reference Guide User Manual
Page 5
How to QuickTune™ a COMM frequency from the data base:
1.
Locate the Airport (APT ) pages for the facility you desire to communi-
cate with. The APT 4 page displays the frequency type (TWR = Tower
Freq, GRND = Ground Control, etc.) and frequency.
2.
Press the
B
button to turn the cursor on and use the right outer knob
to scan through all the airport’s frequencies. There may be more fre-
quencies than can be displayed at one time.
3.
When you have the cursor over the desired frequency, press
F
and that frequency will become the standby frequency in the COMM
transceiver.
To adjust the volume by overriding the automatic squelch:
1.
Pull out on the small knob in the upper left cor-
ner of the KLX 135. This will either allow you
to receive a distant, weak signal or give you a
noise reference by which to adjust the volume.
2.
Push the volume knob back in for normal squelch operation.
136.97 KDAL
118.00 ATIS 120.15
>Leg CLR 127.90
APT+4 GRND 121.75
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
GPS
KLX 135
B
COMM
Pull
25K
Pull
TEST
VOL
OFF
ENT
CLR
MSG
D
CRSR
Pull
SCAN
136.97 KDAL
118.00
ATIS 120.15
ÉÑ>Leg CLR 127.90
APT+4 GRND 121.75
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
GPS
KLX 135
B
COMM
Pull
25K
Pull
TEST
VOL
OFF
ENT
CLR
MSG
D
CRSR
Pull
SCAN
136.97 KDAL
120.15 ATIS 120.15
>Leg CLR 127.90
APT+4 GRND 121.75
APT VOR NDB SUP ACT NAV FPL CAL SET OTH
GPS
KLX 135
B
COMM
Pull
25K
Pull
TEST
VOL
OFF
ENT
CLR
MSG
D
CRSR
Pull
SCAN
B
Pull
TEST
VOL
OFF
-5-
KLX 135.R4 5/16/03 2:33 PM Page 6