BendixKing GC 360A - Manual (Page 11)

Select the BOTH mode to view nav-
igation graphics from Nav 1 and
Nav 2 sensors simultaneously.
Since this NAV mode requires the
weather radar to be n standby
mode, weather information will not
be displayed along with the naviga-
tion graphics. Data blocks contain-
ing waypoint name, bearing and
distance information appear in the
same format as during single nav
operations. The current HSI course
now appears above the appropriate
navigation sensor’s data block.
Information about the active Nav 1
waypoint appears on the left side of
the screen, in cyan, with Nav 2 data
on the right, in yellow. 90˚ SCAN RADARS
When installed with the 90˚ scan
RDS 81, 82 or ART 2000 weather
radar, the navigation data blocks
generated by the GC 360A appear
in the same format in both 90˚ sec-
tor and 360˚ circle modes. In single
nav modes, the flight-planned
course and waypoint name, bearing
and distance information appear in
the lower right corner of the radar
indicator. With the GC 360A set to
BOTH, navigation data from the two
sensors appear in the indicator’s
lower opposite corners.
10
DUAL NAV OPERATIONS
Station Bearing
(NAV 1)
Wind Direction
Indicator
Wind Speed
Annunciator
NAV 2 Data
(Yellow)
Reference
Annunciator
NAV 1 Data
(Cyan)
Station Bearing
(NAV 2)
360˚ circle mode selected