3 connecting the dock n’ charge to your computer – Warpia SWP240 User Manual
Page 7
7
4.3
Connecting the Dock n’ Charge to Your Computer
To connect the docking station to your Laptop or Tablet, do the
following:
1.
Connect the dc-in connector of the power adapter to the docking station.
2.
Connect the power plug of the power cord to an electrical outlet. Press the power
button to turn on the docking station.
3.
Connect the USB B plug of the USB 3.0 cable to the USB 3.0 upstream
connector on the docking station.
4.
Connect the USB A plug of the USB 3.0 cable to an available USB connector on
the notebook computer. A USB 3.0 port will have higher performance than a
USB 2.0 port, though both will work under normal circumstances
Notes:
•
Connecting the Dock n’ Charge to any input other than a USB 3.0/2.0 connector or
using any USB cable other than a USB 3.0/2.0 cable might impact performance,
especially video playback and Ethernet performance.