Kidde KN-COPE-D - Manual (Page 21)

This alarm also has a battery carrier tamper resist feature,
which helps prevent the battery carrier from being opened.
This feature is effective in preventing the removal of the
battery from this device.
To activate the battery carrier tamper resist feature, remove
the unit from the trim and locate the small cut-out in the
middle of the product label on
the back of the unit. With a small
screwdriver, or similar tool, slide
the switch towards the top of the
label. (see Figure 6) The tamper
resist feature is now active and
the battery carrier can not be
opened until the tamper resist
feature is deactivated.
FIGURE 6
Operating Instructions
POSTS
FIGURE 5A
FIGURE 5B
15
2540-7202-02(KN-COPE-D).qxd:_ 2014.3.13 2:23 PM Page 21