Kidde KN-COPE-D - Manual (Page 19)

13
Operating Instructions
NOTE: DENSE SMOKE WILL OVERRIDE THE HUSH®
CONTROL FEATURE AND SOUND A CONTINUOUS
ALARM.
CAUTION: BEFORE USING THE ALARM HUSH® FEA-
TURE, IDENTIFY THE SOURCE OF THE SMOKE AND BE
CERTAIN A SAFE CONDITION EXISTS.
Reset Feature
If the Smoke/CO Alarm is sounding a CO alarm, pressing
the test/reset button will initiate a test/reset. If the CO con-
dition that caused the alert continues, the alarm will reacti-
vate.
Alarm/Peak Level Memory
If the green LED is blinking once every 16 seconds, the
unit has detected a hazardous condition. If the unit has
detected a CO level of 100 PPM or greater, pushing the
Test/Reset button will result in a voice message “Caution,
carbon monoxide previously detected”. Peak level also
happens if the unit detects smoke and then comes out of
alarm. However, there is no voice message if the unit is in
peak level due to smoke. When the Test/Reset button is
pushed, the unit will produce three rapid beeps. Pushing
the test/reset button resets the memory. It’s also reset
when the power is removed.
2540-7202-02(KN-COPE-D).qxd:_ 2014.3.13 2:23 PM Page 19