Kidde KN-COU-B - Manual (Page 11)

Recommended Installation Locations
CO monitors should be mounted in
or near bedrooms and living areas. It
is recommended that you install a
Kidde CO alarm on each level of
your home and use this monitor for
low background CO levels.
When choosing your installation
location, make sure you can hear the
monitor from sleeping areas.
• When wall mounting, place out of reach of children. Under no circum-
stances should children be allowed to handle the CO monitor.
• Placing the monitor at eye level allows for optimum monitoring of the
digital display.
• If you install only one CO alarm in your home, install it near bedrooms,
not in the basement or furnace room. This monitor is not a substitute
for CO alarms.
3. Installation Locations
DINING KITCHEN BEDROOM BEDROOM
BEDROOM
LIVING ROOM
Recommended Locations
2. Product Features and Specifications
(cont.)
Temperature: Operating Range: 40°F (4.4°C) to 100°F (37.8°C)
Humidity: Operating range: 10-95% non-condensing
Audible Alarm: 85+ dB at 10’ @ 3.4±0.5 KHz pulsing alarm
Sensor: Electrochemical
Power: 3-AA Batteries
Accuracy of Digital Display: (10-999 PPM +/-30% when measured in
conditions of 80° F (+/- 10° F), atmospheric pressure +/- 10% and 40%
+/- 3% relative humidity. Display readings may vary slightly depending
on changes in the ambient condition (temperature, humidity) and the
condition of the sensor.
2541-7201-01_revB_EN_V1:_ 2013.3.5 11:13 AM Page 11