Eng li s h, Operations – Clarion VMA7196 User Manual
Page 7
VMA5096/VMA7196
7
E
ng
li
s
h
Configuration 1
Configuration 2
You don’t need to select the IR channel if you have only one monitor or two monitors
and only one video source (Configuration 1—both monitors play the same video or
game).
4. OPERATIONS
Your monitor is a component of a full audio/video system that may include a VCR,
DVD player, game player, camcorder or other video source unit.
Note
If you have any questions about compatible components, such as
system controllers, source units, FM modulators or other audio/video
products, contact your authorized Clarion dealer.
To operate the monitor, the vehicle ignition key switch must be in the ACC or ON (run)
position.
Key in the ACC or engine ON position
WARNING!
To prevent the battery from going dead, always operate this
unit with the engine running, if possible.
Turning the unit on and off
The video source unit, such as a DVD player, may turn on automatically when you turn
the ignition on. Press the power button at any time to turn the monitor off.
When you turn the vehicle’s ignition off, the monitor automatically shuts off.
Video source
Video source
Video source
Monitor
Monitor
Monitor
Monitor
IR CH A
IR CH A
IR CH A
IR CH B
VMA5096_VMA7196_OwnersManual_rev.pmd.p65
11/23/05, 2:53 PM
7