Kidde P3010K-CO - Manual (Page 17)

After cleaning, test your alarm by using the test button. If cleaning does
not restore the alarm to normal operation, the alarm should be replaced.
• Never use detergent or other solvents to clean the unit.
• Avoid spraying air freshener, hair spray, or other aerosols near the alarm.
• Do not paint the unit. Paint will seal the vents and interfere with the
sensor’s ability to detect smoke and CO.
• Never attempt to disassemble the unit or clean inside. This action will
void your warranty.
• The following substances can affect the CO sensor and may cause false read-
ings and damage to the sensor: Methane, propane, isobutane, iso-propanol,
ethyl acetate, hydrogen sulfide, sulfide dioxides, alcohol based products,
paints, thinner, solvents, adhesives, hair spray, after shave, perfume, and
some cleaning agents.
• Move the Smoke/CO Alarm and place in another location prior to performing
any of the following:
• Staining or stripping wood floors or furniture
• Painting
• Wall papering
• Using adhesives
Storing the unit in a plastic bag during any of the above projects will protect the
sensors from damage. When household cleaning supplies or similar contami-
nates are used, the area must be well ventilated.
WARNING: Reinstall the Smoke/CO Alarm as soon as possible
to assure continuous protection.
12. GOOD SAFETY HABITS
DEVELOP AND PRACTICE A PLAN OF ESCAPE
Prepare and practice a home escape plan twice a year, including drills at night.
Know two ways out of every room (door & window) and identify a meeting
place outside the home where everyone will gather once they have exited the
residence. When two people have reached the meeting place, one should leave
to call 911 while the second person stays to account for additional family mem-
bers.
Establish a rule that once you’re out, you never reenter under any
circumstance!