beautypg.com

Nuisance alarms, Alarm visual and audible indicators – Kidde P3010K-CO User Manual

Page 12

background image

7. NUISANCE ALARMS

This Smoke alarm is designed to minimize nuisance alarms. Cigarette smoke will
not normally cause the unit to alarm, unless the smoke is blown directly into the
alarm. Combustion particles from cooking may set off the alarm if it is located
too close to a cooking appliance. Large quantities of combustible particles are
generated from spills or when broiling. Using the fan on a range hood which
vents to the outside (non-recirculating type) will also help remove these combus-
tible products from the kitchen.

If the alarm does sound the smoke alarm pattern of 3 long beeps, check for fires
first. If a fire is discovered, get out and call the fire department. If no fire is

If you require further information please contact

Product Support at 1-800-880-6788 or write us at: Kidde, 1016 Corporate

Park Drive, Mebane, NC 27302. Our internet address is www.kidde.com.

* End of life hush feature. Silences end of life indication 3 days at a time for

a maximim of 30 days.

6. Alarm Visual and Audible Indicators

Alarm

Mode

Visual

Indications

Audible

Indications

Smoke or Fire detected

3 blinks synchronized with audible alarm

3 long beeps, repeating

Carbon Monoxide

detected

4 blinks syncronized with audible alarm

4 quick beeps, repeating

Operational

Mode

Visual

Indications

Audible

Indications

Note:

Normal

Operation

Blink once every 60

seconds

None

LED will flash every 60 seconds for

10 minutes following power on or

reset. After initial 10 minutes,

LED will flash once every

10 minutes

Test/Hush

Button Press

Blink with each alarm

pattern

Two sets of 3 long

beeps

Test/Hush button press will initiate

test sequence

Smoke or CO

Alarm Hush

Blink once every 10

seconds

None (smoke alarm

silenced)

Alarm hush feature silences smoke

alarm for approx. 10 minutes.

Low Battery

Blink once every 30

seconds

Chirp every 30

seconds

Replace alarm

Fault Mode

Fault code (2-12

flashes every 30

seconds)

Chirp every 30

seconds

Replace alarm

End of Unit

Life*

2 blinks every 30

seconds

2 chirps every 30

seconds

Remove alarm, disable, replace

End of Unit Life

Hush

None

None (End of Life

chirps silenced)