4 monitoring the print head overheating, 5 self testing and internal settings, 6 print area – Citizen Systems CMP-10 User Manual

Page 32

— 28 —

5.4 Monitoring the Print Head Overheating

If the temperature exceeds 65°C for some reason, the printer
automatically stops printing with Power LED indication of “Error” to
protect the print head.
If the head temperature returns to 60°C or below, the printer is ready for
printing.

5.5 Self Testing and Internal Settings

● Keep the LF switch pressed down.

● Press the ON/OFF switch down.

● Release the ON/OFF switch.

● Release the LF switch.

Immediately after releasing the LF switch the printer will print out a SELF
TEST report.
At the end of the report, density, auto-power off time, head temperature,
battery output voltage, communication mode, baud rate (for serial
communication) are printed.
The number of marks * in the parentheses aside battery output voltage
shows a level of battery charge in 5 steps.