Citizen Systems CMP-10 - Manual (Page 16)

— 12 —
2. GENERAL SPECIFICATIONS
Feature Parameters
Printing system Direct thermal printing
Printing speed 50 mm/sec
Printing head Total dots: 384
Dot density: 8 dots/mm
Printing width: 48 mm
Emulation ESC/POS commands plus extra commands for specific
printer features
Characters ASCII Code, Alphanumeric characters,
International characters, Windows Code page
Characters per line FONT A: 32 characters/line, FONT B: 42 characters/line
Dot matrix FONT A: 12H × 24V, FONT B: 19H × 16V
Bar code type UPC-A/E, JAN(EAN)13/8 columns, ITF,
CODE39, CODE128, CODABAR, CODE93
Paper feed system Friction feed
Paper width 58 ±0.5 mm
Paper thickness 60 - 65 µm
Recommended paper TF50-KS-E2D (Nippon Paper)
Paper roll maximum diameter 40 mm (CMP-10- ×4), 50 mm (CMP-10-×5)
Minimum core diameter 8 mm
Interfaces IrDA version 1.0
Serial interface (by serial cable - option)
IrDA Interface Mode: Infrared transceiver mode
Transport wave: Wave length - 850 to 900 nm
Communication speed: 9600, 19200, 38400, 57600,
115200 bps
Data length: 8 bits
Start bit: 1 bit
Stop bit: 1 bit
Parity: none
Communication: Half duplex
Flow control: IrDA standard
Communication distance: Max. 80 cm