Sangean Package PR-D5 (V1) - Manual (Page 9)

8
GB
Setting radio alarm time
The alarm time may be set after the clock time is set. The alarm
can be set either radio is on or off.
1. Press the ALARM button, the radio alarm symbol will flash, and
the alarm time is shown.
2. During radio alarm flashing, press the SET knob for more
than 2 seconds followed by a beep tone, and the hour digits will
flash.
3. Rotate the SET knob to select the hour then press the SET knob
to confirm hour setting, and the minute digits will flash.
4. Rotate the SET knob to select the minute then press the SET
knob to finish setting.
5. Tune into the desired radio station and adjust the volume for the
alarm, and turn off the radio.
6. While the alarm is sounding, press the POWER button to stop it.
Sleep function
The sleep timer switches off the radio after a preset time has
elapsed.
. Press and continue to hold down the Power button for more than
2 seconds, followed by beep tone, the display will cycle through
the available sleep times in the order 60-45-30-5-20-90-60.
Release the Power button when the required sleep time appears
on the display. The symbol will appear on the display and
the radio will play the last station selected.
2. To cancel the sleep function, press the POWER button, and the
symbol will disappear and radio is off.