Sangean Package PR-D5 (V1) - Manual (Page 10)

9
Setting tuning step
Why setting tuning step?
There are different tuning steps for different countries. If you buy
the radio in Europe and intend to use it in America, includes Latin
America, the tuning step should be switched.
1. When radio is off, long press the STEP/BAND button until it
beeps and “24 HOUR” flashes. Then rotate the TUNING knob to
switch 24/2 hour system.
2. Press the STEP/BAND button and then rotate the TUNING knob
to switch MW (AM) step which is MW 9KHz or MW 0 KHz.
(0K for America and 9K for most other countries)
3. Press the STEP/BAND button to finish the setting.
Note:
After the tuning step is switched, AM station presets are erased.
FM Stereo / Mono mode
. FM Stereo/Mono mode switch is on the side of the radio.
2. When FM signal is weak, some hiss may be audible. To reduce
the hiss, switch the Stereo/Mono to Mono mode.
Headphone socket
A 3.5mm headphone socket located on the left-hand side of your
radio. That is to provide for either headphones or an earpiece. In-
serting a plug automatically mutes the internal speaker.
Reset the radio
When this device been attach by static electricity, the display may
show random codes (meaningless characters). To retrieve it, un-
plug the power and take out the batteries for more than 3 minutes,
the display will be back to the normal.