Sangean Package PR-D5 (V1) - Manual (Page 6)

5
Setting the clock
. Clock can be set either the radio is power on or off.
2. Press the SET knob (on the side of the radio) for more than 2
seconds, display will flash time set symbol and also the hour
digits, followed by a beep.
3. Rotate the SET knob to set the required hours.
4. Press the SET knob, the minute digits will flash.
5. Rotate the SET knob to set the required minute.
6. Press the SET knob to complete time setting. Or press POWER.
Operating the radio
Tuning the radio
. Press the Power button to turn on the radio.
2. Select the required waveband by pressing the Band button.
There are 3 bands which are FM, AM and AUX-IN.
3. Rotate the Tuning knob to the desired frequency, shown in the
display.
4. Or, press the TUNING button to seek for the next available
station.
5. Rotate the Volume knob (on the side of the radio) to get required
sound level.
6. To turn off the radio, press the Power button.