Sangean U4 (V1) - Manual (Page 26)

25
Snooze
. When the alarm sounds, press any button other than the Power
button will silence the alarm for 5 minutes. “SNOOZE” will a
pear on the display.
2. To adjust the silence time for the snooze timer, press the Menu
button to enter the menu setting.
3. Rotate the Tuning control until “SNOOZE X” shown on the dis-
play, then press the Tuning control to enter the setting. Rotate
the Tuning control to adjust the silence time. There are 5, 0, 5
and 20 minutes for the snooze timer. Press the Tuning control
to confirm the setting.
4. To cancel the snooze timer while the alarm is suspended, press
the Power button.
Nap timer
. Press the Nap timer button to enter the menu setting. Repeat-
edly press and release the Nap timer button and the options will
increase in 5 minute increments from 5 to 20 minutes. Alter-
natively, rotate the Tuning control to adjust the timer in minute
increment.
2. Stop when the required Nap Timer option appears on the dis-
play and press the Tuning control to confirm the setting. The re-
maining time of an active timer setting will show on the display.
3. Press the Nap timer button to view the remaining time of an ac-
tive timer setting. To cancel a sounding Nap timer, press Power
button. If any button other than the Standby button is pressed
when the alarm sounds, snooze function will be activated. To
cancel the function when countdown is progressing, go to nap
timer setting menu and select ‘OFF’.