Sangean U4 (V1) User Manual

Page 21

Pairing and playing your device via NFC

U4 is equipped with wireless NFC (Near

Field Communication) feature, allowing

playing NFC-enabled devices to pair and

play the music. For non-NFC devices, please

refer to the above sections for standard

Bluetooth pairing.
. Turn on your NFC feature on your device. (

Important: Please

make sure the screen of your playing device is

on and

unlocked to allow NFC to work.)

2. Touch the NFC area of your playing device against the

NFC area marked on top panel of U4. The unit will switch to

Bluetooth mode and enter automatic pairing . If you pair with

U4 for the first time, your NFC-enabled device will be asked the

permission to link with the radio. Once paired with a device, the

Bluetooth icon will remain illuminated.

3. Use the controls on your device or on your radio to play/ pause

and navigate tracks.

Note:

. If you would like to link another Bluetooth device for the first

time via NFC, disconnect the existing linked Bluetooth device

first.

2. The location of the NFC detection area is not the same on all

devices. When connecting with other Bluetooth device via NFC,

refer to the User guide of the other device for more information.

3. Some of metallic case or cover for mobile phones may reduce

the sensitivity of NFC. Make sure you remove it, before

activating the NFC.

Disconnecting your NFC-enabled device

To disconnect your device, simply touch it again on the top of

the unit. The LED light for Bluetooth icon will then start to flash

indicating your radio is discoverable again for pairing.
(

Important: Please make sure the screen of your playing device is

on and unlocked to allow NFC to work.)