FaxBack NET SatisFAXtion 8.7 (Including R3) - Installation Guide - Manual (Page 6)

NET SatisFAXtion 8 7 Installation Guide — Page 6
Eicon Diva Server
Your Eicon Diva Server hardware will have come with a driver CD Please have it ready prior to installing your Eicon hardware,
or download the latest drivers from http://www.eicon.com/.
Power off your server and install the Eicon Diva Server card
Power the server on The Windows Found New Hardware wizard will start This cannot be used to install the driver Click
Cancel
Locate and run the Setup exe on the Eicon Diva Server CD or in the folder where the downloaded drivers were extracted A
simple wizard will open that will install the required files
Do not check the “Run customized installation wizard” checkbox You will want a default driver install
Click Next and then Finish The installer will reboot the server
After the server has rebooted, run the Diva Server Configuration Manager
Configure the card and line as appropriate Configure a fax modem pool as the top-most device The number of modems should
be equal to the number of T1 or PRI channels Save, then activate the configuration The Diva Server Configuration Manager will
create the requested number of modem devices, then reboot the server
You are now ready to install NET SatisFAXtion Proceed to “2 Installing NET SatisFAXtion ”