Cover panel installation – Compaq Keyboard/Monitor/Mouse Switch Box User Manual
Page 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-4 Installation
Writer: Kristi Wishon Project: Installation Comments:
File Name:E-ch02.doc Last Saved On:9/6/96 3:18 PM
Cover Panel Installation
After the unit is fully installed, secure the front cover panel using the middle
hole, as shown below.
HYDR-008.EPS
Figure 2-4. Securing the front cover panel
Compaq
Keyboard/Monitor/Mouse
Switch Box System
Installation
Use the following procedure for system installation:
WARNING: To reduce the risk of electric shock or damage
to your equipment, make sure the power cord is disconnected
from the Switch Box.
1.
Connect the keyboard, monitor, and mouse cables to the switch
monitor, keyboard, and mouse connectors as shown below. Note that
all keyboard and mouse cables are 6-pin mini-DIN PS/2 style, and all
the video cables are 15-pin VGA style.