47 assembly of the front and rear bumper, No.8, Assembly of the booy and paintng – OFNA Racing DM-1 Spec User Manual

Page 22

Text mode
Original mode

ASSEMBLY OF THE FRONT AND REAR BUMPER

94009
4x10mm
Hex Screw

.....x2

94026
4x12mm
Flat Head
Hex Screw

.....x2

.....x4

94020
3x12mm
Flat Head
Hex Screw

4x10mm
Hex Screw

40725
Foam Bumper

94042
4mm
Nylon Nut

NO.8

BAG

3x12mm
Flat Head
Hex Screw

Tighten

40721

4x12mm

3x12mm

Tighten

40721

4mm

ASSEMBLY OF THE BOOY AND PAINTNG.

Spray Paint

Paint the body with
polycarbonate spray paints.

Before cutting and making holes on the body,
put the unpainted body on the chassis
to confirm the mounting position and
location for holes and cutouts.

Mask the windows from
the inside with masking tape.

Making two holes on the front and
two holes on the rear for body posts.

9mm

Cut Out

Body Reamer
(Not included.)

31138
Body

(Option)

Use a neutral detergent to
remove any dirt and oil.

Cut out the body as shown.