Pro-Link Sanitex Spray Surface Cleaner MVP1500 - Manual (Page 3)

Material Safety Data Sheet Sanitex MVP Surface Cleaner
Page 3
Issued: September 18, 2012
Vectair Systems, Inc.
8. EXPOSURE CONTROL AND PERSONAL PROTECTION
Ventilation
Not necessary when used as directed and work place exposure guidelines are maintained. If work place
exposure guidelines are to be exceeded, use proper ventilation to maintain safe environment.
Respiratory Equipment
Not required when work place exposure guidelines are maintained.
Protective Gloves
Not Required. This product is safe for skin contact. If prolonged skin contact is expected, use of
chemical
resistant gloves is recommended.
Work Place Exposure Guide Lines
Ethanol has a PEL of 1000 ppm; TLV of 1000 ppm
9. PHYSICAL AND CHEMICAL
PROPERTIES
Boiling Point: 180 ºF
Specific Gravity (water =1): 0.90
Vapor Pressure (mm Hg): Not
Established
Melting Point:
Not Applicable Vapor Density (Air =1):
>1
Evaporation Rate (butyl Acetate=1):
1.2
Solubility in Water: Soluble
Reactivity in Water: NIL
Appearance: Colorless
liquid Odor: Low odor
10. STABILITY AND
REACTIVITY Stability: [ ]
Unstable [ X ] Stable Conditions
to Avoid: None
Incompatibility (Materials to avoid): Strong oxidizing and reducing agents.
Hazardous Decomposition Products: Thermal decomposition may produce oxides of carbon and
nitrogen.
Hazardous Polymerization: [ ] May Occur [ X ] Will Not Occur
Conditions to Avoid: Not Applicable.
11. TOXICOLOGICAL INFORMATION
This product is believed to have a low toxicity and should not pose a hazard to health when
used correctly in industry.