Pro-Link Sanitex Spray Surface Cleaner MVP1500 - Manual (Page 2)

Material Safety Data Sheet Sanitex MVP Surface Cleaner
Page 2
Issued: September 18, 2012
Vectair Systems, Inc.
4. FIRST AID MEASURES
Eyes: Flush with water for fifteen minutes. If burning persists, see a physician. Do not rub eyes.
Skin: In the case of chapped hands, apply a skin moisturizer.
Ingestion: Immediately rinse mouth out with water. Do not induce vomiting. Get medical attention.
Inhalation: Remove to fresh air. Seek medical attention if symptoms persist.
5. FIRE-FIGHTING MEASURES
Flash point: 55 ºF (minimum)
Flammable Limits (volume percent in air): LEL: Not Established UEL: Not Established
Autoignition Temperature: Not determined
Fire-Fighting
Keep fire exposed containers cool with water spray. Separate unburning product from fire. Use carbon
dioxide, foam, or dry chemical extinguishing media to put out fires.
Unusual Decomposition Products Under Fire Conditions
None
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions
Rinse thoroughly after contact. Launder contaminated clothing before reuse.
Environmental Precautions
Remove all sources of heat or flame.
Dike large spills to prevent ingress into sewers.
Clean spills with absorbent and store in marked containers for disposal.
Dispose in accordance with all applicable regulations.
Flush area with water to remove slippery floor hazard.
7. HANDLING AND STORAGE
Safe Handling and Storage
Store containers away from sources of heat or flame.
Do not smoke around or while using this product.
Keep containers inside and out of direct sunlight.
Avoid storage temperatures above 100 ºF and below 40 ºF.
Do not reuse containers.
Incompatible Products
Avoid strong oxidizing and reducing agents.