Pro-Link Lithofin FZ Stain-Stop 120024 - Manual (Page 4)

Material Safety Data Sheet
Printed: 08.11.2004
Revised: 03.11.2004
Lithofin FZ Stain-Stop
4
The exact break trough time has to be found out by the manufacturer of the protective gloves and has
to be observed.
Eye protection: Chemical safety goggles
Body protection: Protective work clothing.
—————————————————————————————————————————————
9 Physical and chemical properties:
General Information
Form: Liquid
Color: Colorless, clear
Odor: Aromatic
Value/Range Unit Method
Change in condition
Melting point/Melting range:
undetermined
Boiling point/Boiling range: > 110 ° C
Flash point:
> 23 ° C
Auto igniting:
Product is not self igniting.
Danger of explosion:
Product is not explosive. However, formation of explosive
air/vapour mixtures are possible.
Explosion limits:
Lower:
~ 0.6 Vol %
Upper: ~ 12.0 Vol %
Density:
at 20 ° C ~ 0.8 g/cm³
Solubility in / Miscibility with Water: Insoluble
Viscosity:
dynamic:
at 20 ° C < 30 s
Additional information
VOC-Content: 757.2
—————————————————————————————————————————————
10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
Dangerous reactions No dangerous reactions known
Dangerous products of decomposition:
In the case of fire or at high temperatures the formation of the following decomposition products is
possible: Carbon monoxide and carbon dioxide
—————————————————————————————————————————————
11 Toxicological information
Acute toxicity:
LD/LC50 values that are relevant for classification:
No toxicity data are available for the product itself.
Primary irritant effect:
on the skin: Repeated contact has a drying effect on the skin.
on the eye: No irritating effect.
Sensitization: No sensitizing effects known.
Additional toxicological information:
The product shows the following dangers according to internationally approved calculation methods for
preparations: Harmful